LUXI LUXI Integrated Polishing System
EN
ENEnglishRUРусскийTHไทยIDBahasa IndonesiaVITiếng ViệtHIहिन्दीJA日本語

Troubleshooting

Compound falls off the brush

The compound does not stay on bristles or fibres long enough to polish effectively.

Loose neutral compound fragments falling from the tips of a small brush onto a metal surface.

Symptoms

  • Compound falls away from the brush quickly.
  • The brush reaches the recess but the polishing action remains weak.
  • The operator keeps adding compound without improvement.

Likely causes

  • The compound may not adhere well to bristles at low temperature.
  • The brush is overloaded or too dirty.
  • The selected compound is too dry for the carrier.

Checks

  • Check whether the brush is clean and lightly charged.
  • Check whether the carrier is bristle, radial brush, thread or cord.

Recommended fixes

  • Use LUXI Purple sparingly and keep the brush lightly charged.
  • Clean the brush before reapplying compound.
  • Avoid loading the brush heavily to compensate for poor transfer.

Prevention

  • Use LUXI Purple for brush and fibre carriers when retention matters.
  • Reapply small amounts only after the brush is clean enough to transfer compound.