LUXI LUXI Integrated Polishing System
EN
ENEnglishRUРусскийTHไทยIDBahasa IndonesiaVITiếng ViệtHIहिन्दीJA日本語

Troubleshooting

Tripoli paste residue is difficult to remove

For zinc and tin alloys, LUXI Brown can replace the traditional Tripoli first stage and leave a cleaner surface before LUXI Pink.

Brown-gray Tripoli-type residue trapped in the relief of a silvery-gray pewter or zamak cast buckle.

Symptoms

  • Brown or grey residue remains in recesses after a traditional Tripoli paste process.
  • Cleaning requires stronger washing than desired.

Likely causes

  • Residue from Tripoli-type paste can be difficult to remove.
  • Residue may be trapped in pores, recesses or textured surfaces.

Checks

  • Check whether the material is zamak, pewter, zinc alloy or tin alloy.
  • Inspect recesses before final finish or coating.

Recommended fixes

  • Consider LUXI Brown as a cleaner replacement for the traditional Tripoli first stage, followed by LUXI Pink.
  • Use controlled cleaning rather than unnecessarily aggressive washing.

Prevention

  • Choose a cleaner first-stage route when residue removal matters.