LUXI LUXI Integrated Polishing System
EN
ENEnglishRUРусскийTHไทยIDBahasa IndonesiaVITiếng ViệtHIहिन्दीJA日本語

Troubleshooting

Relief remains dull after brush polishing

The brush reaches the area, but the contact remains too cool, weak or overloaded to create brightness.

An ornate metal relief with bright raised edges and visibly dull recessed fields beside a small brush.

Symptoms

  • Open surfaces polish well, but relief remains dull.
  • Recesses look filled or grey after brush work.

Likely causes

  • Brush contact is weaker than wheel contact.
  • Compound amount is too high for the detail.
  • The compound does not stay active in the cool contact zone.

Checks

  • Check whether the dullness is residue or unpolished metal.
  • Inspect under light after cleaning.
  • Check whether LUXI Purple improves compound transfer.

Recommended fixes

  • Clean the detail before judging the result.
  • Use LUXI Purple with minimal compound and short passes.
  • If the area is delicate, keep LUXI Green as the controlled low-temperature alternative and confirm final parameters during process testing.

Prevention

  • Do not assume that a brush route behaves like a normal wheel route.
  • Separate access, compound retention and final shine checks.