LUXI LUXI Integrated Polishing System
EN
ENEnglishRUРусскийTHไทยIDBahasa IndonesiaVITiếng ViệtHIहिन्दीJA日本語

Troubleshooting

Small tools do not generate enough working heat

Small diameter and low surface speed can reduce heat generation and compound mobility.

Rotary handpiece with a cylindrical felt attachment working inside a ring

Symptoms

  • The tool turns but the compound feels dry or inactive.
  • The surface does not brighten as expected.
  • Increasing time does not noticeably improve the result.

Likely causes

  • Small tool diameter reduces surface speed.
  • Low rpm or light pressure keeps the contact zone cool.
  • The compound binder is not becoming mobile enough for the route.

Checks

  • Check tool diameter and rpm.
  • Check whether the task needs LUXI Green control or LUXI Purple adhesion/action.
  • Check whether the workshop setup can produce the required route.

Recommended fixes

  • Use a LUXI Green or LUXI Purple low-temperature route depending on delicacy and aggressiveness needs.
  • Improve tool choice rather than simply adding more compound.
  • Inspect after short passes.

Prevention

  • Consider surface speed and tool diameter before choosing the compound.
  • Do not assume a small tool behaves like a standard bench wheel.